Rockwell Automation 1783-SR Stratix 5900 Services Router User Manual - Manual (Page 33)

Rockwell Automation Publication 1783-UM005A-EN-P - September 2013 33
Configure the Stratix 5900 Services Router Chapter 3
Assign a Specific IP Address
Follow these steps to assign a specific IP address to the computer. For example, a
static IP address of 10.10.10.3 and a subnet mask of 255.255.255.248.
1. On the General Tab, click Use the following IP address.
2. In the IP address field, enter the IP address.
For example: 10.10.10.3
3. In the Subnet mask field, enter the subnet mask.
For example: 255.255.255.248
If needed, use this dialog box to assign a specific DNS server address.
4. Click OK.
Connect the Computer to the Router
For information on how to physically connect the router to a computer, see
Connect a Personal Computer, Server, or Workstation on page 19 .