Rockwell Automation 1783-SR Stratix 5900 Services Router User Manual - Manual (Page 47)

Rockwell Automation Publication 1783-UM005A-EN-P - September 2013 47
Configure the Stratix 5900 Services Router Chapter 3
Creating an Initial
Configuration of a Feature When you create an initial configuration of a feature, you are configuring a router
interface. Follow these steps to create an initial configuration of a feature.
1. Choose the community that the device belongs to, and click OK.
2. In the Community View page, choose the device that you want to work
with, and click Discover.
Depending on network conditions, Stratix Configurator software can take
several minutes to discover the device. If you want to work with additional
devices in the community, choose them and click Discover.
3. From the Select Community Member pull-down menu, choose a device to
begin configuring a discovered device.
4. Click Configure.
Configuration functions appear in the Configure tree.