Rockwell Automation 1783-SR Stratix 5900 Services Router User Manual User Manual

Page 74

Advertising
background image

74

Rockwell Automation Publication 1783-UM005A-EN-P - September 2013

Chapter 4

Configure the Stratix 5900 Services Router by Using CISCO IOS Command-line Interface (CLI)

Router uptime is 1 week, 1 day, 38 minutes

System restarted by power-on

System image file is “flash:c3640-j-mz_112-
6_P.bin”, booted

via flash

Host configuration file is “3600_4-confg”, booted
via tftp

from 171.69.83.194

cisco 3640 (R4700) processor (revision 0x00) with
107520K/23552K bytes

of memory.

Processor board ID 03084730

R4700 processor, Implementation 33, Revision 1.0

Bridging software.

SuperLAT software copyright 1990 by Meridian
Technology Corp).

X.25 software, Version 2.0, NET2, BFE and GOSIP
compliant.

TN3270 Emulation software.

Primary Rate ISDN software, Version 1.0.

2 Ethernet/IEEE 802.3 interface(s)

97 Serial network interface(s)

4 Channelized T1/PRI port(s)

DRAM configuration is 64 bits wide with parity
disabled.

125K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/
Write)

Configuration register is 0x2102

Advertising