Rockwell Automation 1783-SR Stratix 5900 Services Router User Manual - Manual (Page 59)

Rockwell Automation Publication 1783-UM005A-EN-P - September 2013 59
Chapter
4
Configure the Stratix 5900 Services Router by
Using CISCO IOS Command-line Interface (CLI)
The Cisco IOS command-line interface (CLI) is a user interface that is used for
configuring, monitoring, and maintaining devices. This interface is a terminal
emulator program, such as Putty. Use the emulator to execute Cisco IOS
commands, by using a router console or terminal, or remote access methods.
To create the initial configuration the setup command facility prompts you for
basic information about your router and network.
To configure the initial router settings by using the Cisco IOS CLI, you must set
up a console connection. For instructions on how to set up a console connection,
see
Connect a Terminal or Computer to the Console Port on page 21 .
For more detailed information about CLI, see http://www.cisco.com/en/US/
docs/ios/fundamentals/configuration/guide/cf_cli-basics.html .
Topic Page
How to Use CLI for the First Time 60
CLI Architecture 60
CLI Editor Features 62
Use Command Line Instructions to Configure the Router 64
Router Management 72
Copy the Default Configuration File to NVRAM 80