Rockwell Automation 1783-SR Stratix 5900 Services Router User Manual - Manual (Page 48)

48 Rockwell Automation Publication 1783-UM005A-EN-P - September 2013
Chapter 3 Configure the Stratix 5900 Services Router
5. Choose the configuration task that you want to perform in the Configure
tree.
For example, choose Interface Management > Interfaces and Connections.
Interfaces and Connections
The Interfaces and Connections Window has a Create Connection Tab and an
Edit Connection/Interface tab. The Create tabs provide access to smart wizards
that guide you through the configuration and that let you know if changes you
are making conflict with the existing configuration. The Edit tabs provide
additional settings.
It is a best practice to create a starting configuration by using the wizards then
examine the configuration on the Edit tab to make any further changes.
Follow these instructions to use the wizard.
1. On the Create tab, click Create.
Decide if you need to Enable AAA. For more information, see the Online
Help.