Install stratix configurator software – Rockwell Automation 1783-SR Stratix 5900 Services Router User Manual User Manual

Page 39

Advertising
background image

Rockwell Automation Publication 1783-UM005A-EN-P - September 2013

39

Configure the Stratix 5900 Services Router

Chapter 3

After you have used Stratix 5900 Device Manager software or CLI commands to
give your router a basic configuration, you can use Stratix Configurator software
to do the following:

Add more connections.
Fine-tune configurations you completed by using Stratix 5900 Device

Manager software.

Configure advanced features such as Virtual Private Networks (VPN) and

Digital Certificates.

After you follow the instructions in the

Install Stratix 5900 Services Router on

page 15

, you can use Stratix Configurator software to configure the router.

Install Stratix Configurator Software

If Stratix Configurator software is installed on your computer, you can start the
configuration and provide the IP address of the router. The computer that is
running the software must be configured with IP addresses from the same subnet.

If it is not installed, you can download this software for free at the Rockwell
Automation Product Compatibility and Download Center,

http://www.rockwellautomation.com/rockwellautomation/support/pcdc.page?

Follow these steps to install Stratix Configurator software on a computer.

1. Download the software from the

Rockwell Automation Product

Compatibility and Download Center

.

2. Go to the location of the downloaded file.
3. Double-click the installation file and follow the instructions.

Stratix Configurator software Installshield wizard appears.

4. When the Welcome window appears, click Next to begin the installation.
5. In the screens that follow, review the license terms, and choose where you

want to install Stratix Configurator software.

6. Click Next to begin copying the files to the computer.
7. Choose where you want to create shortcuts for Stratix Configurator

software and then click Next.

8. Click Finish.

Stratix Configurator software runs in Firefox, Google Chrome, and Internet
Explorer. If you are going to use Internet Explorer, you must use version 9.0 or
later. You must also use a non-debug Adobe Flash Player Version 10.0 or later.

If the computer that has Stratix Configurator software installed has Internet
Explorer but does not have Adobe Flash Player installed on it, the software opens
a web browser pointing to the Adobe website

http://get.adobe.com/flashplayer

.

Advertising