Rockwell Automation 1783-SR Stratix 5900 Services Router User Manual - Manual (Page 21)

Rockwell Automation Publication 1783-UM005A-EN-P - September 2013 21
Install Stratix 5900 Services Router Chapter 2
Connect a Terminal or Computer to the Console Port
Connect a terminal or computer to the Console port either to configure the
software by using the configuration software or to troubleshoot problems with
the router.
To connect a terminal or computer to the console port on the router, follow these
steps:
1. Connect the RJ-45 end of a DB-9-to-RJ-45 serial cable to the RJ-45
Console port on the router.
2. Connect the DB-9 end of the DB-9-to-RJ-45 serial cable to the COM
port on your computer.
3. To communicate with the router, start a terminal emulator application,
such as Putty or Tereterm.
You can download the free program at http://www.putty.org/ .
1 RJ-45 connector to the Console Aux port on the router
2 DB-9 connector
TIP Some personal computers do not come with DB-9 serial port
connectors and can require a USB-to-serial port adapter.
32447-M
RESET
SERIAL CON / AUX
GE WAN 0
FE 1 S L FE 0 S L
FE 3 S L FE 2 S L S L
SYS
ACT LAN