Rockwell Automation 1783-SR Stratix 5900 Services Router User Manual - Manual (Page 23)

Rockwell Automation Publication 1783-UM005A-EN-P - September 2013 23
Install Stratix 5900 Services Router Chapter 2
Apply Power
The router comes with a retention lock plug and the power supply. Follow these
instructions to apply power.
1. Attach the locking connector to the power cord.
2. Plug the adapter (with the power cord attached) into the router.
3. Plug the power cord into the outlet.
IMPORTANT This product relies on the building’s installation for short-circuit (overcurrent)
protection. Be sure that the protective device is rated not greater than: 120 V
AC, 20 A U.S (240 V AC, 16…20 A international).
This product requires short-circuit (overcurrent) protection, to be provided as
part of the building installation. Install only in accordance with national and
local wiring regulations.
IMPORTANT The device is designed to work with TN power systems.
ATTENTION: This product is to be connected to a Listed or certified class 2
output/IEC 60950-1 compliant limited power source, rated 5 V DC, 4 A max.
32382-M
32383-M
Locking Connector Assembled