Rockwell Automation 1783-SR Stratix 5900 Services Router User Manual - Manual (Page 46)

46 Rockwell Automation Publication 1783-UM005A-EN-P - September 2013
Chapter 3 Configure the Stratix 5900 Services Router
When you check the Connect Securely check box, HTTPS port 443 and
SSH port 22 information is automatically added for the device. To view
the port information, click the down-arrow next to the Connect Securely
check box.
If you did not check the Connect Securely check box, the HTTP port 80
and Telnetport 23 information is automatically added for the device. To
view the port information, click the down-arrow next to the Connect
Securely check box.
6. If you want to change the default port information, click it, and then enter
a new port value. Make sure that Stratix Configurator software can access
the device at the specified secure or non-secure ports.
7. Check the Discover All Devices check box if you want the software to
discover all of the devices in a community.
8. Click OK.
The Community View page opens and the information about the devices
in the community appears.
TIP You can choose to discover the devices later, from the Community View
page.