Rockwell Automation 2098-DSD-xxx Ultra3000 Digital Servo Drives with DeviceNet - Manual (Page 7)

1 Publication 2098-RM001C-EN-P – August 2002
Preface
Introduction Read this preface to become familiar with the organization of the
manual. In this preface, you will read about the following:
• Who Should Use this Manual
• Purpose of this Manual
• Contents of this Manual
• Related Documentation
• Conventions Used in this Manual
• Allen-Bradley Support
Who Should Use this
Manual This manual is intended for qualified service personnel responsible for
setting up and servicing the Ultra3000 with DeviceNet. You must have
previous experience with and a basic understanding of electrical
terminology, programming procedures, networking, required
equipment and software, and safety precautions.
Purpose of this Manual This manual is a reference guide for using DeviceNet to configure,
monitor, or control Ultra3000 drives with DeviceNet operating with
DeviceNet firmware version 1.xx (i.e., 1.20 or earlier).
Non-Indexing Ultra3000 Drives Indexing Ultra3000 Drives
2098-DSD-005-DN 2098-DSD-005X-DN
2098-DSD-010-DN 2098-DSD-010X-DN
2098-DSD-020-DN 2098-DSD-020X-DN
2098-DSD-030-DN 2098-DSD-030X-DN
2098-DSD-075-DN 2098-DSD-075X-DN
2098-DSD-150-DN 2098-DSD-150X-DN
2098-DSD-HV030-DN 2098-DSD-HV030X-DN
2098-DSD-HV050-DN 2098-DSD-HV050X-DN
2098-DSD-HV100-DN 2098-DSD-HV100X-DN
2098-DSD-HV150-DN 2098-DSD-HV150X-DN
2098-DSD-HV220-DN 2098-DSD-HV220X-DN