Rockwell Automation 6181 Industrial Computer - Manual (Page 117)

Maintenance
This chapter describes routine maintenance procedures for:
•
cleaning the display
•
cleaning the chassis fan filter
Note: Procedures for replacing the RAC6181 Computer backlight
are in Chapter 9.
To clean the display:
ATTENTION: Use of abrasive cleansers or solvents may
damage the display window. Do not scrub or use brushes.
1. Disconnect power from the RAC6181 Computer at the power
source.
2. Using a clean sponge or a soft cloth, clean the display with a mild
soap or detergent.
3. Dry the display with a chamois or moist cellulose sponge to avoid
water spots.
ATTENTION: If the RAC6181 Computer has a
touchscreen, be aware that it is possible for screen objects
to activate during equipment wash-downs.
To remove paint and grease:
Remove fresh paint splashes and grease before drying by rubbing lightly
with isopropyl alcohol. Afterward, provide a final wash using mild soap
or detergent solution. Rinse with clean water.
ATTENTION: Make sure the isopropyl alcohol does not
come in contact with the equipment labels.
Alcohol may cause the label printing to smear.
Chapter
12
Chapter Objectives
Cleaning the Display