Rockwell Automation 6181 Industrial Computer - Manual (Page 20)

2–2 Installation
Publication 6181-UM001D-EN-P
Versions of the RAC6181 Computer with a display are shipped with one
of the following types of mounting hardware:
Table D
Mounting Hardware
Item Description Quantity Use For
Self-locking nuts
(#10-32) 10 (8
required)
Panel or enclosure
mounting (display version)
Mounting clips 6 Panel or enclosure
mounting (display/keypad
version)
In addition to the tools required to make the cutout, you will need the
following tools:
For Mounting Studs:
•
3/8 inch socket
•
6 inch (15 cm) extension rod (minimum)
•
Socket driver (in/lb. torque wrench recommended)
•
Ruler
For Mounting Clips:
•
Flat blade screwdriver
•
Ruler
Mounting Hardware
Tools Required