Rockwell Automation 6181 Industrial Computer - Manual (Page 75)

Replacing the Backlight Tubes 9–3
Publication 6181-UM001D-EN-P
Removing the flat panel display:
1. Remove the 10 screws that
secure the flat panel to the RAC6181 Computer chassis.
2. Carefully pull the flat panel display away from the chassis and
disconnect the following connectors from the flat panel display:
•
LED connector from the LED board
•
Power cable attached to the backlight power supply
Replacing the Backlight
Tubes (10.4-in. Display-
Only Version)