Rockwell Automation 6181 Industrial Computer - Manual (Page 57)

Installing/Removing the Power Supply 5–5
Publication 6181-UM001D-EN-P
To install the power supply (DC option):
1. Connect the two cables from the bottom of the power supply and
fuse assembly to the appropriate connectors on the input terminal
strip.
The red cable connects to +24V DC terminal. The black cable
connects to the 0V DC middle terminal. (For an illustration of the
DC power connection, refer to Page 2-19.)
2. Using the supplied tie strips, secure the cables from the terminal strip
around the base of the fan.
3. Position the power supply in the chassis and secure it with the 4
mounting screws. Torque screws to 0.7 to 0.9 N-m (6-8 in-lbs).