Rockwell Automation 6181 Industrial Computer - Manual (Page 49)

Adding/Removing System Components 4–5
Publication 6181-UM001D-EN-P
To remove a slot cover (to add a board):
1. Remove the top cover. See Page 4-3.
2. Locate the slot cover you want to remove.
3. Remove the screw securing the slot cover and remove the cover.
2-slot version 4-slot version
Slot
Cover
Screw
CPU I/O Slot
CPU Slot
PCI Slots
Shared
PCI/ISA
Slot
ISA Slot
To install a slot cover (after removing a card):
1. Insert the end of the cover into the slot in the chassis.
2. Install the screw securing the slot cover, tighten to 0.7 - 0.9 N-m (6-8
in-lbs.)