Rockwell Automation 6181 Industrial Computer - Manual (Page 94)

10–12 12.1 in. Keypad Bezel Operation
Publication 6181-UM001D-EN-P
Set the Default Configuration for Any Key
1. Select one or more keys or use the edit menu Select All Keys. See
“Selecting Keys” above.
2. Choose Set Default Configuration from the Edit menu.
Figure 5
Set Key Default
The selected keys are set to their default assignments. Non-
programmable keys are enabled by default. The default key assignments
are listed at the end of this chapter.
To restore the factory defaults on the 6181 keypad configuration, select
all keys (Edit menu / Select All Keys), then select the Set Default
Configuration.