Rockwell Automation 6181 Industrial Computer - Manual (Page 73)

Replacing the Backlight Tubes
This chapter describes how to replace the backlight tubes on the
RAC6181 Computer flat panel display. Topics include:
•
Disconnecting the touchscreen cable
•
Removing the flat panel display
•
Replacing the backlight tubes
The RAC6181 Computer contains line voltages. Make sure you
disconnect all power to the RAC6181 Computer before performing any
of the operations described in this chapter.
ATTENTION: Disconnect all power from the RAC6181
Computer before removing components. Failure to
disconnect power could result in severe electrical shock
or damage to the RAC6181 Computer.
Internal RAC6181 components may be damaged by Electrostatic
Discharge (ESD). Make sure you wear a grounding strap whenever
handling circuit boards, memory modules or other internal components.
ATTENTION: Wear a wrist strap (well grounded) and
perform work in a static safe environment.
Electrostatic discharge can damage the RAC6181
Computer and components.
You will have to uninstall the RAC6181 Computer and place it display
side down, with the top of the unit facing you. Make sure to place the
unit on a clean, flat surface to avoid scratching the display.
Chapter
9
Chapter Objective
Safety Precautions