Rockwell Automation 6181 Industrial Computer - Manual (Page 58)

5–6 Installing/Removing the Power Supply
Publication 6181-UM001D-EN-P
4. Connect the power supply cable connectors to the processor board
and other internal components. The connectors are keyed so they
cannot be installed the wrong way, do not force connectors.
ATTENTION: Make sure the air flow director is
properly positioned. Failure to correctly install the flow
director may result in excessive temperatures that can
damage the RAC6181 Computer.
2-Slot Chassis 4-Slot Chassis
5. Install the back and top cover.
ATTENTION: Carefully engage the pins on the back
cover and be careful not to push the vibration dampers
(grommets) on the drive bay out of the sheet metal.