Rockwell Automation 2300 Family of Drive Systems Hardware - Manual (Page 17)

1-5
Preparing the Inside of an MCC
For each MCC that is to be joined to an adjacent MCC, do the following:
If the MCC contains a: Typical Units Go to:
Roll-out chassis unit 2362 (D-G frame units),
2364F (K-N codes) Preparing the Inside of an MCC:
Roll-Out Chassis Units (see page 1-6)
Bucket units 2362 (A-C frame units) Preparing the Inside of an MCC:
Bucket Units (see page 1-7)
Panel-mounted unit 2361 units, 2364E units,
2364F (J-code units) Preparing the Inside of an MCC:
Panel-Mounted Units (see page 1-9)