Rockwell Automation 2300 Family of Drive Systems Hardware - Manual (Page 29)

2-3
4. Disconnect all wires that connect the module to stationary devices in the
MCC.
Important: If any of these wires remain intact, you will not be able to freely
remove the module from the MCC.
5. Disconnect customer wiring at the bottom of the bucket and slide the
wiring into the vertical wireway.
!
ATTENTION: The 2362 A-frame bucket weighs
approximately 45 pounds (21 kg); the B-frame bucket weighs
approximately 90 pounds (41 kg); and the
C-frame bucket weighs approximately 140 pounds
(64 kg). Failure to take precautions when moving a bucket may
result in personal injury and/or damage to equipment.
ATTENTION: Do not force the bucket when removing it from
the MCC. If you cannot easily remove the bucket, verify that all
necessary wires have been disconnected.
ATTENTION: After the bucket has been removed from the
MCC, secure the bucket so that it will not tip over or fall, causing
personal injury and/or equipment damage.