Rockwell Automation 2300 Family of Drive Systems Hardware User Manual
Page 19
Advertising
1-7
Preparing the Inside of an MCC: Bucket Units
1.
Figure 1.5 Removing the Vertical Wireway Door
If the MCC will be spliced on:
Then:
Right side
Loosen 3 screwlatches to open the vertical
wireway door on the right side. See Figure 1.5.
Left side
Follow the procedures in Chapter 2 to remove
any buckets blocking access to the horizontal
bus and joining holes.
Vertical
Wireway Door
Right
Side
Left
Side
Advertising