Rockwell Automation 2300 Family of Drive Systems Hardware User Manual
Page 21
Advertising
![background image](/manuals/580704/21/background.png)
1-9
Preparing the Inside of an
MCC: Panel-Mounted Units
1. Remove the horizontal bus access cover from the joining side of the
MCC, as indicated in Figure 1.7.
Figure 1.7 Removing the Horizontal Bus Access Cover from an MCC Containing a
Panel-Mounted Unit
2. Pull all bottom-entry cables, if present, through the conduit(s) to a spot
where you can reach them after you have put the MCCs in place.
Horizontal Bus
Access Cover
Advertising