Rockwell Automation 2300 Family of Drive Systems Hardware - Manual (Page 43)

5-3
Figure 5.1 Top Views of Various Power Bus Splice Configurations !
Installing Straight Power Bus Splices
a. Both Ends of the Power Bus at the Same Depth
b. One End of the Power Bus at a Depth of 11.92 inches (303 mm); the Other, 16.92 inches (430 mm)
! All views show a dual busbar configuration. In a single busbar configuration, only a single splice is used.
Front Front
Front Front
If each power bus consists of: Then go to:
A single bar Installing Straight Power Bus Splices: Single Bar
Two bars Installing Straight Power Bus Splices: Dual Bar