Rockwell Automation 57C329 Remote I/O Communications, AutoMax - Manual (Page 31)

3Ć5
3.1.3 BNC Plug Connector
Coaxial cable segments are terminated with BNC plug connectors for
attachment to the taps. See figure 3.4. See Appendix G for the
recommended part.
CONTACT FERRULE
Figure 3.4 Ć Dual Crimp BNC Plug Connector
3.1.4 BNC Tee Adapter
The BNC Tee Adapter (M/N 45C70) is used to attach the Remote I/O
Head (M/N 57C328 and M/N 57C330) and the Remote Drive Interface
Head (M/N 57C329) to the Remote I/O network. See figure 3.5. The
adapter must be attached directly to the BNC jack connector on the
front panel of the Remote I/O Head or Remote Drive Interface Head.
Figure 3.5 Ć BNC Tee Adapter