Rockwell Automation DeviceNet Media Design Installation Guide User Manual
Page 51

Publication DNET-UM072C-EN-P - July 2004
Identify Cable System Components 2-15
About KwikLink Insulation Displacement Connectors (IDCs)
KwikLink Insulation Displacement Connectors (IDCs) interface drop cables
and devices to the flat cable trunkline. The hinged, two-piece base snaps
around the flat cable at any point along the trunk. Contact is made with the
cable conductors by tightening two screws that drive the contacts through the
cable jacket and into the conductors. The snap-on interface provides the
connection to the drop cable and is available in micro-, open-, and
general-purpose style connectors.
Allen-Bradley KwikLink connectors are approved only with the following
DeviceNet flat cables:
Catalog Number
Description
1485C-P1E
CL1
1485C-P1L
Aux. Power
1485C-P1G
CL2
Description
Catalog Number
NEMA 6P, 13; IP67
Micro module
w/base
1485P-P1E4-R5
NEMA 1; IP60
Micro module
w/base (no
gaskets)
1485P-P1H4-R5
Open-style module
w/base (no
gaskets)
1485P-P1H4-T4
KwikLink General
Purpose Connector,
Micro
1
1485P-K1E4-R5
1
Use this connector also with KwikLink General
Purpose Flat Cable (1485C-P1K).
41711
41717
49 mm
(1.93 in.)
40 mm
(1.58 in.)
36 mm
(1.40 in.)
45 mm
(1.75 in.)
49 mm
(1.93 in.)
40 mm
(1.58 in.)
36 mm
(1.40 in.)
45 mm
(1.75 in.)
V+
CAN_H
CAN_L
V-