Rockwell Automation DeviceNet Media Design Installation Guide - Manual (Page 52)

Publication DNET-UM072C-EN-P - July 2004
2-16 Identify Cable System Components
Use Preterminated Cables Using preterminated cable assemblies saves you the effort of stripping and
wiring connectors to the cable ends. Because pre-terminated cables are
normally factory-tested, using them also helps reduce wiring errors.
About thick cable
You can order thick cable in multiple lengths with mini connectors at each end.
Single-ended versions are also available for simplified connection to
DeviceBox or open-style connections. Thick cable that is 6m (20ft) or shorter
can also be used as drop lines.
TIP
Additional cable lengths and configurations, other than
those shown, are available from Rockwell Automation.
mini T-Port tap
male plug
specified length
rotating
coupling
nut
rotating
coupling
nut
thick cable
female plug
thick cable
mini T-Port tap
specified
length
Additional configurations are available.
Refer to the On-machine Connectivity
catalog, publication M115-CA001.
Description Catalog Number
Mini male to mini
female 1485C-PxN5-M5
Mini male to
conductor 1485C-PxM5-C
Mini female to
conductor 1485C-PxN5-C
x indicates length in meters (1-10, 12, 15,
18, 24 and 30 are standard).
41718