Rockwell Automation LDC Iron Core Linear Servo Motors - Manual (Page 41)

Rockwell Automation Publication LDC-UM001B-EN-P - March 2011 41
Wire the LDC-Series Linear Motor Chapter 5
Hall Effect Module
This table shows the signal and wire colors for the Hall effect module with flying
leads, catalog number LDC-HALL-F.
Making Your Own
Extension Cables Flying lead coil and Hall effect modules require circular DIN-style connectors to
interface with Allen-Bradley extension cables. The following connectors kits are
available for terminating flying lead coils and Hall effect modules.
The cable length from the coil to drive should be limited to 10 m (32.8 ft). If
longer cables are necessary, a 1321-3R
x-x series line reactor is required. Refer to
the 1321 Power Conditioning Products Technical Data, publication 1321-
TD001 , to choose a line reactor for applications requiring cable longer than 10 m
(32.8 ft).
Color Signal Signal Spec
Red +V 5…24V DC Hall supply, 20 mA.
Black VRTN Hall effect signal common.
White S1
– Blue S2
Orange S3
Silver braid Cable shield
Terminate at drive end per drive
manual instructions.
Connector Kit Cat. No. Application
2090-KFBM7-CAAA Feedback flex extension cable
2090-KPBM4-12AA Power flex extension cable
2090-KFBE7-CAAA Feedback non-flex extension cable
2090-KPBE7-12AA Power non-flex extension cable