Rockwell Automation FANM FanMaster Energy Saving Package - Manual (Page 112)

D-2 FanMaster Application Firmware Upgrades
Allen-Bradley® FanMaster™ Energy Saving Package Installation Manual - Publication FANM-IN001B-EN-P – December, 2009 PN-65329
4. Open the FanMaster enclosure and remove the existing memory module
from the MicroLogix 1100 controller’s processor.
5. Install the new memory module. Verify that the module is fully seated in
place. The new application firmware will be installed on the next power
cycle.
ESC OK
Pull memory module
straight out of chassis.