Configure the fanmaster, Configure the fanmaster -4 – Rockwell Automation FANM FanMaster Energy Saving Package User Manual
Page 40
3-4
FanMaster Configuration and Start Up
Allen-Bradley® FanMaster™ Energy Saving Package Installation Manual -
Publication FANM-IN001B-EN-P – December, 2009 PN-65329
Important: Verify that all steps in
are
complete and that the 20-COMM-H communication adapter is
installed, connected and that the rotary switches are set
correctly before completing the FanMaster configuration
procedure below.
Configure the FanMaster
1. Apply power to FanMaster and apply power to the drive(s), if installed.
The PanelView HMI will boot up (this may take 2…3 minutes).
2. Because the systems has not yet been configured, various alarms will
display. Press “Ack” in the alarm banner, to acknowledge each alarm.
When the Important Notice screen displays, the unit is ready for
configuration.
Permanent Install Only
Evaluation Unit Install Only