Rockwell Automation FANM FanMaster Energy Saving Package - Manual (Page 60)

3-24 FanMaster Configuration and Start Up
Allen-Bradley® FanMaster™ Energy Saving Package Installation Manual - Publication FANM-IN001B-EN-P – December, 2009 PN-65329
55. When the test is complete, press “OK” and then “Next”. The Data
Collection screen displays.
56. In order to finalize the configuration, you will clear any data currently
stored in the logs and then put FanMaster into service collecting new
data. Press “Clear Logs” on the Data Collection screen. A message
displays to confirm that you want to delete the data stored in the log.
Press “Yes”.
57. Press “Start Collecting”. “Stopped” will change to “Collecting”.
FanMaster can run permanently and will collect and store up to five
years of data. After five years, the oldest data will be overwritten by
new data on a month-by-month basis.
58. Press “Done”. The Air Handler Unit Diagram screen displays.
59. Confirm that there are no error messages displayed on the screen. If any
alarms or error messages display, refer to Chapter 4 - Troubleshooting
for more information.