Rockwell Automation GV3000 AC Pwr Module Ver. 5.0 Hardware Ref, Installation, and Troubleshooting User Manual
Page 56
Advertising
6Ć2
Step 2. Connect the threeĆphase AĆC output power motor leads to the proper output terminals
according to drive type.
On 1Ć60 HP drives, connect the motor leads to terminals U/T1, V/T2, W/T3 on the power
terminal strip.
On 60Ć150 HP drives, connect the motor leads to terminals U, V, and W.
Step 3. Tighten the threeĆphase AĆC output power terminals to the proper torque according to drive
type as shown in table 5.1.
Advertising