Rockwell Automation GV3000 AC Pwr Module Ver. 5.0 Hardware Ref, Installation, and Troubleshooting - Manual (Page 91)

AĆ1
Appendix A
Technical Specifications
Table A.1 Ć Service Conditions
AĆC Line Distribution System Capacity (maximum)
for 460 VAC Units
1000KVA, threeĆphase with 25,000 amps symmetrical
fault current capacity with a line impedance of less
than 8%
Control Method AllĆdigital vector, sinusoidal pulseĆwidthĆmodulated
(PWM)
Displacement Power Factor 0.96
Line Frequency 50/60Hz (+2 Hz)
Line Voltage Variation -10% to +10%
Line Dip Ride Through Maximum 500 milliseconds Ć vector
Adjustable up to 999.9 seconds (See P.042) Ć V/Hz
Motor Lead Lengths 76 meters (250 feet) total
Analog Speed Reference Accuracy 0.5%
Acceleration Adjustment Range 0.1 to 999.9 seconds (within the ability of current)
Carrier Frequency 2 Hz, 4 Hz, or 8 Hz, softwareĆselectable
Current Limit Adjustment U.006 to 150% (based on drive nameplate rating) Ć
vector
50% to 110% (based on drive nameplate rating) Ć V/Hz
Service Factor 1.0
Speed Adjustable Range From 0 RPM to maximum speed
Speed Regulation Vector Ć 0.01% long term steady state
V/Hz Ć motor slip dependent
Speed Reference Resolution 1 RPM with local keypad, -4095 to +4095 counts with
a network or serial reference
Torque Control Response 180 to 220 Hz
Torque Linearity +3% with optimal parameter setting (typical) (see
parameter U.005)
Table A.2 Ć Ambient Conditions
Condition Specification
Operating Temperature (Ambient) 0_ to +40_ C (32_ to 104_F)
Storage Temperature (Ambient) -40_āto +65_C (-40_ to +149_F)
Humidity 5 to 95% (nonĆcondensing)