Rockwell Automation GV3000 AC Pwr Module Ver. 5.0 Hardware Ref, Installation, and Troubleshooting User Manual
Page 65
7Ć9
Table 7.1 Ć Wiring Signal and Control I/O to the Terminal Strip (Continued)
БББББ
Б
БББ
Б
БББББ
Terminal
Number
ББББББББББ
Б
ББББББББ
Б
ББББББББББ
Description
БББББББББББББББББББ
Б
БББББББББББББББББ
Б
БББББББББББББББББББ
Parameters/Wiring Connections
ББББББББББББББББББББББББББББББББ
ББББББББББББББББББББББББББББББББ
Wiring Analog Speed Reference Inputs
12
13
14
15
Isolated Reference
Voltage (+15VDC)
Analog Speed/Torque
Reference Input Voltage
(+/- 10 VDC)
Analog Speed/Torque
Reference Input Current
(0Ć20mA)
Isolated Speed/Torque
Reference Common
(Voltage/Current)
The following parameters must be set:
P.000: Control Source
P.009: Terminal Strip Analog Input Offset
P.010: Terminal Strip Analog Input Gain
P.011: Terminal Strip Analog Input Invert
Refer to the GV3000 Programming instruction manual
(D2Ć3339) for additional parameter information.
Jumper J4 must also be set. See figure 2.10.