Manually step through the states – Rockwell Automation 1794-Lxxxx PhaseManager User Manual
Page 19
Advertising
Publication LOGIX-UM001B-EN-P - April 2010
19
PhaseManager Quick Start
Chapter 2
Manually Step Through the
States
Before you do this procedure, do the following:
• Download the project to the controller.
• Put the controller in run or remote run mode.
Step
Notes
1. Right-click the equipment phase and choose Monitor Equipment
Phase.
2. Click the ownership button and then Yes—take ownership.
This lets you use this window to step through the states.
Advertising
This manual is related to the following products: