Rockwell Automation 1794-Lxxxx PhaseManager - Manual (Page 83)

Publication LOGIX-UM001B-EN-P - April 2010 83
Equipment Phase Instructions (PSC, PCMD, POVR, PFL, PCLF, PXRQ, PRNP, PPD, PATT, PDET) Appendix A
download recipe control verses
manual phase control Download Batch Data DINT[0] 4
DINT[1] parameter ID in which to store the value
In the result value:
0 = recipe control
1 = manual phase control
download current mode of the
phase Download Batch Data DINT[0] 5
DINT[1] parameter ID in which to store the value
In the result value:
0 = P - Auto mode
1 = O - Auto mode
download the low limit of an input
parameter Download Batch Data DINT[0] 6
The input parameter tag stores the low
limit.
download the high limit of an input
parameter Download Batch Data DINT[0] 7
The input parameter tag stores the high
limit.
download data about the container
currently in use. Download Material Track Data
Container In Use DINT[0] 1
DINT[1] attribute ID
DINT[2] parameter ID in which to store the value
download data about the current
material inside the container
currently in use. Download Material Track Data
Container In Use DINT[0] 2
DINT[1] attribute ID
DINT[2] parameter ID in which to store the value
download data about the current
lot inside the container currently in
use. Download Material Track Data
Container In Use DINT[0] 3
DINT[1] attribute ID
DINT[2] parameter ID in which to store the value
upload data about the container
currently in use Upload Material Track Data
Container In Use DINT[0] 1
DINT[1] attribute ID
DINT[2] parameter ID that has the value
upload data about the current
material inside the container
currently in use. Upload Material Track Data
Container In Use DINT[0] 2
DINT[1] attribute ID
DINT[2] parameter ID that has the value
upload data about the current lot
inside the container currently in
use. Upload Material Track Data
Container In Use DINT[0] 3
DINT[1] attribute ID
DINT[2] parameter ID that has the value
download the current binding's
container priority Download Container Binding
Priority DINT[0] parameter ID in which to store the value
upload a new container priority for
the current binding Upload Container Binding Priority DINT[0] parameter ID that has the value
If You Want To Then Configure The PXRQ Instruction As Follows
External Request Data Value
Array Element Value