Rockwell Automation 1794-Lxxxx PhaseManager - Manual (Page 8)

8 Publication LOGIX-UM001B-EN-P - April 2010
Preface Preface
Purpose of This Manual This manual shows you how to set up and program a Logix5000 controller to
use equipment phases. It gives you guidance and examples to:
• lay-out your code in sections that include equipment phases.
• set up a state model for your equipment.
• program your equipment to run by the state model.
• use equipment phase instructions to transition to a different state,
handle faults, set up break points, and so forth.
A Logix5000 controller is any of the following:
• 1756 ControlLogix controllers
• 1769 CompactLogix controllers
• 1789 SoftLogix5800 controllers
• 1794 FlexLogix controllers
• 20D PowerFlex 700S with DriveLogix controllers
Who Should Use This
Manual This manual is for those who program or maintain industrial automation
systems.
To use this manual, you must already have experience with:
• programmable controllers.
• industrial automation systems.
• personal computers.
How To Use This Manual As you use this manual, text that is courier identifies information that you
must supply based on your application (a variable). For example, ‘Right-click
name_of_program ...’ means that you must identify the specific program in
your application. Typically, it is a name or variable that you have defined.