Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start - Manual (Page 14)

14 Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012
Chapter 1 Prepare the PanelView Plus Terminal Hardware
Follow These Steps
Mount the PanelView Plus Terminal
In normal applications, you mount a PanelView Plus terminal to a panel. For the purpose of this
quick start, however, the PanelView Plus can be propped on a desktop to complete the tasks
described herein.
For complete mounting instructions, see the PanelView Plus Terminals User Manual, publication
2711P-UM001 .
1 2 3 4
5 6
7 8
Mount the PanelView
Plus Terminal
page 14
Connect the
Power Supply
page 15
Connect the PanelView
Plus Terminal to the
EtherNet/IP Network
page 16
Assign an IP Address to
the PanelView Plus
Terminal
page 16
GND
+ –
GND