Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start User Manual
Page 35
Advertising
Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012
35
Create a PanelView Plus Application Chapter 2
6.
Click and drag to create the
indicator.
7.
Right-click and choose
Properties.
8.
On the General tab, select 2 for
the Number of states.
9.
On the States tab, verify that
State0 is selected.
10.
In the Caption, type
Light
is OFF.
Advertising