Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start - Manual (Page 28)

28 Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012
Chapter 2 Create a PanelView Plus Application
Install RSLinx Enterprise Software
Throughout the installation, click Next to use default RSLinx Enterprise software installation
settings, except when indicated in the following steps.
1. Click Next.
2. Read the license agreement carefully.
3. Check I accept the terms in the license
agreement and click Next.
IMPORTANT Your computer must have RSLinx Enterprise software to use FactoryTalk View Studio software.
Immediately following the end of installing FactoryTalk View Studio software, the installation
process for RSLinx Enterprise software begins automatically.
TIP As installation progresses and depending on your system configuration, you may be prompted to complete additional
set-up tasks not described in this chapter.
Follow those prompts and enter information as applies to your installation.