Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start - Manual (Page 30)

30 Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012
Chapter 2 Create a PanelView Plus Application
7. When the InstallShield Wizard
Completed dialog box appears,
click Finish.
You must restart the computer
to complete the installation
process.
8. Restart your computer.
Create a New Application
1. Launch FactoryTalk View Studio software.
2. On the Application Type
Selection dialog box, select
Machine Edition and click
Continue.