Add a goto configuration mode button, Add a goto, Configuration mode – Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start User Manual
Page 43: Button
Advertising
Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012
43
Create a PanelView Plus Application Chapter 2
Add a Goto Configuration Mode Button
1.
From the Objects menu,
choose Advanced Goto
Configure Mode.
2.
Click and drag to create the
Goto button next to the push
button.
3.
Right-click the push button
and select Properties.
Advertising