Assign function keys, Assign function, Keys – Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start User Manual
Page 45
Advertising
Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012
45
Create a PanelView Plus Application Chapter 2
Assign Function Keys
If your PanelView Plus does not have a touch screen, you must assign functions keys to the
display buttons. This publication uses a PanelView Plus 1000, catalog number
2711P-K10C4D1. That terminal does not have a touch screen.
To assign function keys, complete these steps.
1.
Right-click the push button
and select Key Assignments.
2.
Under Select an object, verify
that MaintainedPushButton is
selected.
3.
Select a function key and click
Apply.
This example uses F2.
Advertising