Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start - Manual (Page 25)

Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012 25
Create a PanelView Plus Application Chapter 2
3. Click Install FactoryTalk View
Site Edition.
4. Click Install FactoryTalk View
Site Edition.
All Rockwell Automation software
products should be shutdown, as
described in
step 1 . If they are not,
the software alerts you to this
requirement.
5. Click Yes.
6. Click Next.