Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start - Manual (Page 41)

Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012 41
Create a PanelView Plus Application Chapter 2
A message appears warning you that the Update Rate changes take effect only after the
display is reopened.
5. Click OK.
6. Save the display and close it.
7. Double-click the display name,
PanelView_Plus_project in
this case, to reopen the display.
8. Click the Play button.