Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start - Manual (Page 40)

40 Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012
Chapter 2 Create a PanelView Plus Application
The Indicator tag is populated.
12. Click OK.
13. From the File menu,
choose Save.
14. When prompted for a display
title, type
PanelView_Plus_project.
Test the Indicator and Push Button
1. Verify that the mode switch on your controller is moved to Run.
2. Right-click an unused area of
the display and select Display
Settings.
3. Change the Maximum Tag
Update Rate to 0.05.
4. Click OK.