Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start User Manual
Page 48
Advertising
48
Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012
Chapter 2 Create a PanelView Plus Application
4.
From the Tools menu, choose
Transfer Utility.
5.
Click the ... button.
6.
Select the .mer file you just
created and click Open.
7.
Verify the following:
•
Run application when
download completes is
checked
•
Replace communications
is checked
•
Your PanelView Plus is
selected for the destination
terminal
8.
Click Download.
The download process may take a few minutes.
Advertising