Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start - Manual (Page 9)

Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012 9
Preface
Where to Start
Prepare the PanelView
Plus Terminal Hardware
page 13
Create a PanelView
Plus Application
page 21
Prerequisite Tasks
Described in Before Using This Publication on page 5 .
1. Prepare the Logix5000 control system hardware.
2. Prepare the computer.
3. Configure the networks.
4. Create an RSLogix 5000 project.
Logix5000
Controller