Create a device shortcut to the controller, Create a device, Shortcut to – Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start User Manual
Page 33: The controller
Advertising
Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012
33
Create a PanelView Plus Application Chapter 2
Create a Device Shortcut to
the Controller
1.
Expand the EtherNet/IP tree,
select your controller and click
Add.
2.
Type a shortcut name; do not
use spaces.
3.
Verify that the controller you
selected in
is still selected.
4.
Click Apply.
5.
Click Copy from Design to
Runtime.
6.
Click OK.
Advertising