Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start - Manual (Page 49)

Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012 49
Create a PanelView Plus Application Chapter 2
9. When the Transfer Utility
dialog box appears, click OK.
10. Exit the Transfer Utility.
Test the Application on the PanelView Plus Terminal
1. On the PanelView Plus
terminal, press Load
Application [F1].
2. Select your .mer file and press
Load [F2].
3. Press Yes [F7].
4. After the application loads,
press Run Application [F2].