Additional resources – Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start User Manual
Page 19
Advertising
Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012
19
Prepare the PanelView Plus Terminal Hardware Chapter 1
10.
Press OK [F7] to save settings, as shown, and press OK [F7] to acknowledge the reset
message.
11.
Press [F8] four times until you return to the initial configuration screen.
12.
Press [F7] to reset the terminal.
13.
Press [F7] to confirm.
Additional Resources
For a list of additional resources that might assist you when preparing the PanelView Plus
terminal hardware, see
Advertising